VideoJet ® new color to break which is suitable for Coding standards



These new ink colors were specifically designed to expand the capacity of the Videojet 2300 series printers in the huge sign.  Inkjet color can be used to add visual interest and functionality out of the box.  Color can also be Visual character specifies the product variants, or link to the company's image and product packaging.

These inks are very similar performance is widely used for M512 (K) black color and has a good performance on porous paper and kraft Board materials including high recycled content


The main advantages of


.  Improved productivity of the visually distinctive colors employed in


o the area six visually differentiated, compatible with the color formatting


o improve the activities of the 2300 printer brings the increased differentiation and code value


·  Code Security and sustainability sustainable code pigmented formulations:


o increased UV light fastness and fade resistance than dye preparations based on


o better water resistance over inks in applications such as or frozen packing where the environmental conditions can produce light compaction


o claims print quality over a wide range of substrates and different platform such as porosities recycled content and applications cover different grades of Kraft paperboard


o produce sharp codes to optimize the barcode readability


·   Simple usability


The ink color in this family are chemically compatible with each other, so little risk of ink color during the transition. (Note: the transition between colors are still required to Archive a consistent color match.)


The primary market applications


Inks for their identity visually attractive and/or the product onto paper and pulp wood raw materials such as wood and timber.Colors can be used as Visual cues to identify particular sub-brand; to distinguish between the different grades of lumber; or show specific building regulations.


The inks have excellent brand of coding on top of the porous end products also have a secondary mailbox, and to identify and differentiate the outer wrappings of various weights and grades of paper quality.


The encoding is different from the porous substrates such as plain and coated paper packaging, packaging for the product and the other based on the mass of the bundles can be achieved with these inks. Manufacturers also use color as a tool for effective control of the quality of the Visual-plant or inventory management.


View the original article here

SWF equipment NNEP Dublin, Ohio



Midwest distributors presented the SWF embroidery equipment, Embassy Suites in Dublin, OH (5100 upper Metro Place Dublin, Ohio 43017, United States, 1-614-790-9000). Show opening hours at 10 to 5 pm on Fridays and Saturdays. Call Midwest at 1-877-724-6400, if you want to reserve one of our specialists, or just go to visit us!

Centrally located in the heart of Missouri and serve areas in and around North Dakota, South Dakota, Nebraska, Kansas, Oklahoma, Arkansas, Missouri, Iowa, Minnesota, Illinois, Tennessee, Kentucky, Ohio, Michigan, Indiana, Wisconsin. Midwest position interior solutions for all needs-SWF embroidery equipment, Roland cutter solutions (Rhinestones, vinyl, twill, etc) and a heat press and more! Create all kinds of solutions to your customers.


SWF Midwest distributors offers a different design solutions for new and growing companies. The latest innovation of the SWF embroidery equipment, Multi-Media design solutions (vinyl cutters, heat presses &) Midwest can help provide you with the right ideas and tools to offer our customers a one-stop-shop. Diversify your business or adding to it, you can provide the perfect solution to all kinds of requests. The Midwest has over 50 + years in the embroidery industry, come and meet the experts see the latest hardware, software, new technologies & trends.


To take advantage of a free start-up consultations for more information on the topics that interest you the most-stop Suite 404 Free konsultoitavaksi 30 + year industry veterans conducted by business and apparel decoration equipment needs (ie: Rhinestones, vinyl, etc.).


Midwest distributors is one of the oldest companies in the embroidery and sewing industry began in 1955, the same family that runs it today offer all the products related to interior design solutions.


View the original article here

NightFire Analog ICs Design Kit



This is the Analog ICs Design Kit #3. It consists of 293 pieces of Electronic ICs, Transistors, Diodes, PCBs, Resistors, Ceramic & Aluminum & Tantalum Capacitors, Inductors, Crystals, LEDs, Potentiometers, and Electronic Hardware. The ICs include Op Amps, Comparators, Timers, Voltage Regulators, and more. The Transistors & Diodes include NPN & PNP & FET & Zeners. The Electronic Hardware includes a Speaker, an Electret Microphone, a Battery Clip, several Switches, Headers, and more. This kit includes 2 blank Perfboards to do your prototyping. This is an excellent collection of parts to use in your Electrical Engineering Hobby kits.

Price:


Click here to buy from Amazon

The large-scale welding business in Chesapeake, VA., property is sold at auction on April 11-12



The Steeltech manufacturing Inc., was founded on trade in a wide range of industrial welding – the property is sold at an auction on April 11-12, at the premises of the company is located at 1401 Precon drive the Chesapeake. The building and the property is not sold, only vehicles, equipment, inventory items, and some of the furniture and furnishings.

There will be heavy commercial vehicles and forklifts, over 35 welding machines, drill presses, burn the machines, a huge steel job waffle massage tables, the power and the tools to more than 50 meters, saws (with Amada saw and do all vertical bandsaw, model U-1421) inventory of steel and scaffolding and some Office furniture and equipment.


Steeltech manufacturing, Inc., founded in 1999, and in a short period of time grew into one of the largest major welding shops in the area. Its customer base was noted, and the company maintained numerous companies with varying degrees of industry needs. Steeltech intends to continue to operate the reduced back to the scale to make a mobile site for jobs and working in the lower position.


The auction will begin at 9: 00 am (EST) on both days and was carried out by the Atlantic Asset Management Group, based in Helsinki. Providers can participate in simulcast live online auction at www.bidspotter.com or absentee www.atlanticREmarketing.com.


Atlantic Asset Management Group, a spokeswoman said about 20 property, adjacent to the marine companies folded in the sales. The preview will be held on Tuesday, April 10, from 10 am-2 PM, where you can view all the items. The whole catalogue with color images, can also be viewed on the website, www.atlanticREmarketing.com.


Several items are expected to produce an eager bidder interest. One is Mitsubishi Heavy Caterpillar model V330C forklift, hoped its 15 ½-foot-tall mast. It is one of less than ten of these kinds of forklifts in Virginia. The second is managing automation CNC burning table (steel cutter) Limited (and many accessory parts, such as a water tank and air dryer). Still another is the Piranha Iron worker — durable, single operator hydraulic ironwork station.


Cars are a 2007 Peterbilt model 387 18-Wheeler 475 HP engine, 13 speed, sleeper and 110,000 miles on the odometer; 2003 GMC Sierra 3500 SLT Duramax, one-ton four-door 4 x 4 pickup truck, extended crew cab, V-8 turbo diesel engine and 205,654 km; and a 2001 Chevrolet Silverado 3500 pickup truck, the one tonne dually "V-8, extended cab.


Other forklifts are from Yale for forklift propane 7,314 hours; Taylor Big Red truck (model TY-220 M, 22,000 lbs.); and Wiggins Lift Trucks (model W156Y, 23,150 hours). Also sold is homemade 2001 utility trailer. the unfinished V-8 engine of 1991 vehicle 250hv Oshkosh 1983 trailer. and two of the construction site trailers suitable for on-site offices.


The equipment is expected to WoW the crowd and feature heavy duty steel structures manufacturing table measuring 40 feet 5 inches to 8 feet 2 inches; the various Welders (installed, Mobile, and Lincoln); Automatic disk sometimes; Particular; follow the torches; air compressors (such as Sullair, Atlas, 185, 750 and Ingersoll Rand, 90); tank trolley; and an optional trailer mounted pressure washer.


Also sold is the drum cover on the winch motor; BendTec 3000-pipe manufacturing and bending machine; the 15-ton deck mounted crane; the 15-ton boom truck; 22-foot catamaran; pliers; tank trolley; and hand tools; Shop fans; heaters; warehouse shelves; and ladders. Too many to list and describe the different welding material here are offered as well.


Marine action items include two deck winches (one single, one double barrel drum, as well as Detroit 371 engines) compressor Atlas Copco model LE 75-10; two open drawers; two of the five foot roller stands; one of the steering wheel to block the chain; two of the five foot gear-driven roller stands; working level; Pallet outdoor lights; man basket; and other items.


The fixtures and fittings will be tender. Offer will be Yancy tube scanner; laptop and desktop computer; and assorted furniture. 15% buyer's fee applies to all purchases (3% surcharge will be added, if paying by credit card). All products are sold "as is-where is" without any warranties expressed or implied.


Winning bidders in the auction can pay by cash, cashier's check, Visa, Master and Discover cards. Approved the Bank's guarantee to accept cheques. All items must be paid in full before the deletion can be started. Does not come with the removal of assets, also during the auction. The asset and depreciation on April 13 and 14.


Atlantic Asset Management Group is a full service auction company specializing in commercial and residential area, the profits from the sale of real estate, commercial and retail businesses, machinery, heavy equipment, surplus vehicles, commercial and marine pleasure craft and furniture, accessories and equipment. Bonded and licensed since 1979, a group specialising in asset value.


Atlantic Asset Management Group is always interested in quality broadcasting, business liquidations, real estate sales and the characteristics of future sales. Discuss solutions to the assets, business or property, you can call them right away (757) 461-6867; or you can send them to info@atlanticremarketing.com. For more information about the Atlantic Asset Management Group and an April 11-12 Steeltech manufacturing industry in the auction, log on to www.atlanticremarketing.com.
30-


Ken Hall to write before sale and after sale press releases, auction houses for a fee. He will write, send, and track the stories to the customers. Submissions will be published in trade magazines, posted on the website of the industry and will appear in local newspapers.


Photo:
http://www.PRLog.org/11830742/1


View the original article here

SainSmart Prototyping Prototype Shield Mini Breadboard for arduino UNO



It is a great kit to new Arduino users and geeks who have sparkling ideas. You can choose to do soldering in the soldering area. You can also make good use of the mini breadboard which can save your time of soldering. Try any circuit you want to the Arduino. You also can choose to use your own breadboard.

Protoytpe Shield

* The small soldering area
* Access to a BlueSMiRF socket for wireless communication between Arduinos
* 2 general LEDs
* 1 general pushbutton switch
* 1 Arduino reset switch brought to top level
* 5V, GND, and Raw pins are exposed as well
* All Arduino pins are brought to the top level

Mini Breadboard

* 170 tie points.
* Self-adhesive backing to stick on the Arduino Protoytpe Shield
* Strong
* Measures 1.7"x1.3"

Package Content

1 x SainSmart Prototype Shield
1 x Mini Breadboard
65x Jumper Cable


Price: $19.00


Click here to buy from Amazon

Sketching User Experiences: Getting the Design Right and the Right Design



Bill Buxton and I share a common belief that design leadership together with technical leadership drives innovation. Sketching, prototyping, and design are essential parts of the process we use to create new products. Bill Buxton brings design leadership and creativity to Microsoft. Through his thought-provoking personal examples he is inspiring others to better understand the role of design in their own companies--Bill Gates, Chairman, Microsoft

"Informed design is essential.” While it might seem that Bill Buxton is exaggerating or kidding with this bold assertion, neither is the case. In an impeccably argued and sumptuously illustrated book, design star Buxton convinces us that design simply must be integrated into the heart of business--Roger Martin, Dean, Rotman School of Management, University of Toronto

Design is explained, with the means and manner for successes and failures illuminated by engaging stories, true examples and personal anecdotes. In Sketching User Experiences, Bill Buxton clarifies the processes and skills of design from sketching to experience modeling, in a lively and informative style that is rich with stories and full of his own heart and enthusiasm. At the start we are lost in mountain snows and northern seas, but by the end we are equipped with a deep understanding of the tools of creative design.--Bill Moggridge, Cofounder of IDEO and author of Designing Interactions

"Like any secret society, the design community has its strange rituals and initiation procedures. Bill opens up the mysteries of the magical process of design, taking us through a land in which story-telling, orange squeezers, the Wizard of Oz, I-pods, avalanche avoidance, bicycle suspension sketching, and faking it are all points on the design pilgrim's journey. There are lots of ideas and techniques in this book to feed good design and transform the way we think about creating useful stuff". -Peter Gabriel

I love this book. There are very few resources available that see across and through all of the disciplines involved in developing great experiences. This is complex stuff and Buxton's work is both informed and insightful. He shares the work in an intimate manner that engages the reader and you will find yourself nodding with agreement, and smiling at the poignant relevance of his examples.--Alistair Hamilton, Symbol Technologies, NY

Books that have proposed bringing design into HCI are aplenty, though books that propose bringing software in to Design less common. Nevertheless, Bill manages to skilfully steer a course between the excesses of the two approaches and offers something truly in-between. It could be a real boon to the innovation business by bringing the best of both worlds: design and HCI. --Richard Harper, Microsoft Research, Cambridge

There is almost a fervor in the way that new products, with their rich and dynamic interfaces, are being released to the public-typically promising to make lives easier, solve the most difficult of problems, and maybe even make the world a better place. The reality is that few survive, much less deliver on their promise. The folly? An absence of design, and an over-reliance on technology alone as the solution.

We need design. But design as described here depends on different skillsets-each essential, but on their own, none sufficient. In this rich ecology, designers are faced with new challenges-challenges that build on, rather than replace, existing skills and practice.

Sketching User Experiences approaches design and design thinking as something distinct that needs to be better understood-by both designers and the people with whom they need to work- in order to achieve success with new products and systems. So while the focus is on design, the approach is holistic. Hence, the book speaks to designers, usability specialists, the HCI community, product managers, and business executives. There is an emphasis on balancing the back-end concern with usability and engineering excellence (getting the design right) with an up-front investment in sketching and ideation (getting the right design). Overall, the objective is to build the notion of informed design: molding emerging technology into a form that serves our society and reflects its values.

Grounded in both practice and scientific research, Bill Buxton's engaging work aims to spark the imagination while encouraging the use of new techniques, breathing new life into user experience design.

. Covers sketching and early prototyping design methods suitable for dynamic product capabilities: cell phones that communicate with each other and other embedded systems, "smart” appliances, and things you only imagine in your dreams;
. Thorough coverage of the design sketching method which helps easily build experience prototypes-without the effort of engineering prototypes which are difficult to abandon;
. Reaches out to a range of designers, including user interface designers, industrial designers, software engineers, usability engineers, product managers, and others;
. Full of case studies, examples, exercises, and projects, and access to video clips (www.mkp.com/sketching) that demonstrate the principles and methods.

About the Author

Trained as a musician, Bill Buxton began using computers over thirty years ago in his art. This early experience, both in the studio an on stage, helped develop a deep appreciation of both the positive and negative aspects of technology and its impact. This increasingly drew him into both design and research, with a very strong emphasis on interaction and the human aspects of technology. He first came to prominence for his work at the University of Toronto on digital musical instruments and the novel interfaces that they employed. This work in the late 70s gained the attention of Xerox PARC, where Buxton participated in pioneering work in collaborative work, interaction techniques and ubiquitous computing. He then went on to become Chief Scientist of SGI and Alias|Wavefront, where he had the opportunity to work with some of the top film makers and industrial designers in the world. He is now a principal researcher at Microsoft Corp., where he splits his time between research and helping make design a fundamental pillar of the corporate culture.

* Covers sketching and early prototyping design methods suitable for dynamic product capabilities: cell phones that communicate with each other and other embedded systems, "smart" appliances, and things you only imagine in your dreams;

* Thorough coverage of the design sketching method which helps easily build experience prototypes-without the effort of engineering prototypes which are difficult to abandon;

* Reaches out to a range of designers, including user interface designers, industrial designers, software engineers, usability engineers, product managers, and others;

* Full of case studies, examples, exercises, and projects, and access to video clips that demonstrate the principles and methods.

Price: $49.95


Click here to buy from Amazon

The machine for welding supply is the significant increase in the history of the &



The machine welding Supply of & Tuscaloosa, AL, there have been four generations of a family and of the Aldredge each new is brought to the gases and welding distribution agreement to new levels of growth.

The spring issue of welding the welding and gas today, leading & gas supply company, the gases and welding Distributor Association (GAWDA) President elect Lloyd Robinson-Machine Welding Supply Company Emmett & Aldredge Jr. sat down with the President and his son, Vice Presidents Emmett Aldredge III and Christopher Aldredge. Robinson, Chairman of the AWISCO Maspeth, n.y., discussed the history of welding machine company & trio and also asked about the future of the company.


The company was born in a machine shop to open William Aldredge Dunn, NC, in 1925. Emmett Aldredge, SR. and his brother Raymond Aldredge are directed to towards the gases and welding on the side of the business and bought the company his father after returning from World War II.


Emmett Aldredge SR died in 1972, and Emmett Aldredge, Jr. became President at the age of 25. Under the leadership of the company grew by Emmett Aldredge Jr. in four locations. In addition, the "arcs and sparks" staples, the company expanded into the beverage CO2 in the business. Aldredges points out the latest in the company's range of products made it possible to diversify to withstand cyclical phases.   (the two-part sentence fit together.)


Is a family business, the company is rooted in the welding machine & 's commitment to its employees. To safeguard the company's future success. Aldredges that is the jurisdiction of the family businesses. "The one thing that my father instilled in me and that I have instilled in my son, is that we are more than the owners of the company — we are the stewards of, a company," says Emmett Aldredge, Jr.


For more information about the welding gases & today Editor Carole Jesiolowski at (315) 445-2421; E-mail editor@weldingandgasestoday.org.


Information About The GAWDA
In 1945, the gases and Welding Distributors Association (GAWDA) is the leading source of knowledge, education and networking. Its member journals (www.weldingandgasestoday.org), e-newsletters, and industry on the wiki (www.gawdawiki.org) through the GAWDA connects suppliers of gases and associated equipment manufacturers and manufacturers of welding equipment and the distribution of these products to safely deliver optimal solutions, leaders of the users. GAWDA publications are the industry's voice on all things related to the latest technology and the latest processes, welding equipment and the products and services related to the industrial, medical, specialty and cryogenic gases. (A) A 501 (c) 3 organization, GAWDA members are located all over North America.


View the original article here

Amico Rectangle Copper Prototyping PCB Circuit Board Stripboard Veroboard



Referencing numbers printed on four sides of the Prototype PCB Circuit Board Stripboard for easy reference of individual holes. Great for building a prototype of an electronic circuit, single side copper PCB.

Price:


Click here to buy from Amazon

The revised Darwinian evolution of humanity and machines



The theory of Darwin's theory of evolution is really what we call a theory about biological development "life forms" for billions of years. And this theory was a good description of the processes that took place. However, things changed radically with the arrival of modern humans on Earth, around 40 000 years ago. As a new form of human consciousness, the A3, known as people were able to build cities, irrigate large areas of land and wars. This changed everything.

Ironically, modern science is still refusing to realize this. Against the almost scientific study of evolutionary principles as rigid a biological model. This is due to the irony of the Darwin to discuss this difference. He explained that as a human, biological evolution seen in animals, is overwhelmed by the drive the development of culture. One set of principles are applied to the development of the study of the past. But they are insufficient to expect.


Ideology drives the entire process is the primary example of the war. When 10 's of millions of people will die in less than 10 years of ideological reason, survival of the fittest, physically, to lose its meaning. When millions of people are stored in some of the plague, the congressional vote and the man made drugs, survival of the fittest, physically, to lose its meaning. When prevention is driven by politics and religion, the survival of the fittest, physically, losing its me aning. This is the message that science is completely gone. It means the science of ice, although the changes are occurring and will deal with them in Archaeology.


But it's not, when this runs out. Now making breakthroughs that depict human consciousness will soon be programming computers in the human consciousness. This event is called when a control as a specialty, life on Earth is passed from one person to the intelligent machines. The machines will be mainly in the new "forms of life" and has its own development.


Profound changes is that each factor of evolution in the form, the speed of development of more. But there is only a small amount. The ability to scientifically mediated by cultural development, in particular the genetic tools to change the culture and the behavior happens prices 3-6 order of magnitude faster than biological evolution. And when the machines take over, they can develop into many orders of magnitude faster than society. In addition, they are immortal! And they will be able to repair the damage and to reinvent itself to become an add-on, and interchangeable parts. This is also an emerging paradigm, that science is totally blind.


These discoveries will be dealt with in the two new novels: Liars! Vol. 1-the Scout to the Pole and Liars! Vol. 2-escape the insanity. The summaries are available at http://A3society.org.


Contact Information


Bruce button-Nanook * is * A3society * dot * org
A3society. org. A3societyblog. org
The books are available in printed WordClay http://www.wordclay.com/BookStore/BookStoreSearchResults ...
as well as books on Smashwords is a http://www.smashwords.com/profile/view/Nappi


Information About Bruce Button


Explorer, writer, philosopher, and Jacksonville, Florida, Bruce Button has just released his new book on serial LIARS in two volumes! The books present in more than 40 major discoveries that answer many of the most critical unanswered questions for the ages, including in today's society, there is a lot of chaos and strife. A difficult psychological and philosophical discoveries are explained in everyday language used in a readable, exciting novel format. The discoveries of affects every part of our culture, to make books interesting and valuable reading for anyone who is looking for the understanding and improvement in modern society.


Books-Liars! Vol. 1: the Scout to the Pole; and vol. 2: escape from insanity--based on Nappi's experience as one of an Eagle Scout, in 1965 North Pole Expedition. They present "Atlas Shrugged" philosophical romp through the 3 Stooges perform the Government's scientific community by challenging the fundamental beliefs of human culture. The age of the story is filled with the amazing true adventures of roundwood increased by 40 years of insights and tumble of high-tech business, I would have. Life threatening for the climax of volume 2 to create, finally, assemble all the wisdom and lay out the broad and comprehensive explanation for many of the problems in today's society do not seem to understand.


In the end, the reader learns how the public statements, represents a wide range of "public opinion", the voice of the small elite minority are mainly with the intention to maintain the superiority. Humanity's greatest social institutions: Government, religion, science, education, law, medicine, and even the u.s. Constitution, challenged, and JavaScript is corrupted. A unified structure occurs, which will become the new social structure of the human race.


The Association to the A3:
A3-the Club was founded to gather community of like-minded people to explore new social structure, described in the books of the liars! Vol. 1: the Scout to the Pole and Liars! Vol. 2: escape from insanity.


Contact Information:
Bruce Button
A3 society
2614 Spreading Oaks Lane
Jacksonville, FL 32223
339-222-8467
Nanook@a3society.org
http://a3society.org/


View the original article here

SOIC SMT Prototyping Shield for Arduino with 0.65mm Pitch



Schmartboard has made surface mount components available to Arduino users. These boards utilize our "EZ" soldering technology to assure fast, easy and flawless soldering.

Price:


Click here to buy from Amazon

Pulled the plug on rural broadband plans



Planning rural broadband group to provide rural-dependent BT broad band services Oxfordshire Super fast Internet service has said cannot go ahead project, the BBC learned. Dorset's similar project was turned down last month. It criticized the Government for wasting taxpayer money by giving all of its broad band funds report battalion just a few weeks after.

Official BT angry band rural broadband roll-out is a monopoly. Oxfordshire and Dorset County Council signed a contract with BT to provide broadband service to rural areas. These agreements means that the alternative method is no longer needed. Having competition in the broadband market is important I think that professional.


"Operators of some weak product niche does not understand how can win what they believe BT ? and want to deliver the now better and faster service contracts" and founder of band broadband news site ThinkBroadband, said Sebastien Lahtinen. By the Government to oversee BDUK rural broadband roll-out group process processing method has been widely criticized. BT has been awarded any contracts of the majority of homes in the United Kingdom serving so-called fibre to the Cabinet (FTTC) service England and Wales.


Offers green around the textile town or village, United Kingdom Cabinet as cabinet is dependent on copper wire connection to reach the meaning will be further from home, cabinets, slow service, individual House old fashioned. Most of rival rural broadband provider is faster than FTTC run the fiber to the premises and want to deploy fibre home ( FTTH services. Whether taxpayers ' money was outrage has gone to the former Telecom monopoly and as well as by using the best technology, the doubts.


Recently from the Commons Public Accounts Committee (PAC) report the last Government, the United Kingdom, said that should set aside 10% super fast broadband more wisely to get to spend the money. As part of the process of getting broadband to hard to reach Britain really Broadband group were encouraging bidding for another pot of money known as the rural broadband bands Community Fund.


In July, Culture Secretary Maria Miller he innovative broadband band schemes lent her support and love them in Dorset and Oxford ' should co-exist with the willing, led by the battalion in the wide rural broadband band method, ' and saying

Good value

5,000 Cotswolds broad band system West Oxfordshire site serving home fibre service purposes. I was disappointed to find you can't scheme goes ahead. "To all Oxfordshire County Council supports it along, but it is not going to separate from the contract for BT and they plan now decided" said Hugo Pickering, Cotswold broadband head.


Is going to be responsible for Council compensation claims we have already put a whole lot of money, so Mr. Pickering. His schemes have much better value provided money for taxpayers for most of it stakeholders and funded by private residents and others believe that he. "We just 34% in some cases much lower than BT for 90% of State aid, State aid and wanted to", he said.

Stop the innovation.

It is echo point by Steve Adamson, Dorset, as well as schemes running, aiming to run a fibre network along a disused railway track. "Our plans offer's House not what BT offers to textile. It was going to be good, it was going to be cheaper "and he said. "That area was going to leave us dead in the BT intended cover and delayed a decision, signing a contract with time County Council battalion It until the water plan.


Ask third rural broadband band method, B4RN is already up and would be subject to broad band rural funds, are waiting for you in Lancashire. Told by one of the founders of the B4RN Chris Condor BBC: "cheating should have a level playing field when it comes to taxpayers ' money. BT to effectively stop technological innovation and competition and reduces the effectiveness of Government support.


B4RN is scheduled to meet soon with BDUK. Mr. Lahtinen has BT Broadband rural domination is not surprised. Have a wide range of choices of BT existing nationwide wholesale broadband band platform and the channel consumers to buy broadband services from them, he said. "So many Councils did the same decision as a lot of other Congress as a BT secure option to might be.


In response the BT told the BBC: "it is up to local councils to decide who tackle rural broadband. I.e., an important consideration is the need to open all the Isp network benefits. Local monopoly is avoided in this way, the customers choice. "BT developing systems to support such competition spends enormous amounts of money, and local small business owners may therefore receives public funds, cannot meet those conditions and qualifications.


View the original article here

Transistor Circuit Development Kit 2N4401



This is the Transistor Prototype PCB Design Kit with 2N4401& 2N4403 Transistors. This kit is what you need to develop numerous different transistor circuits. It includes the extremely useful NightFire Prototype Transistor PCB along with some of the very popular 2N4401 NPN & 2N4403 PNP Transistors in the standard leaded TO-92 package. You will also get a blank Prototype PCB with 162 holes, also designed by us, to expand your circuits. The PCB is designed for different types of biasing with outputs at several points in the circuit. With this kit, you can build transistor switches, audio amplifiers, buffers, level shifters, logic gates, emitter followers, and much more, such as, single-transistor guitar effects circuits.


This Prototype PCB can be used for NPN, PNP, FETs, MOSFETs, SCRs, and more. Simply populate the components that you need. You will also get different common values of 1/4 Watt, Carbon Film 5% Resistors, Ceramic & Tantalum Capacitors, Inductors, Signal & Power & Zener Diodes, Trimpots, LEDS, an Electret Microphone, a miniature Speaker , Pushbutton Switches, and a Battery Clip. This kit has 166 total pieces. There are NO SMT components in this selection; all components are Thru-Hole. All this comes in a Plastic Box that can serve as a Project Box as well. The Prototype PCB is 1.13" x 2.0" made of FR-4 material, 0.062", with all holes plated-thru. The Blank Perf-Board is 1.14" x 2.10" and it made of FR-4 material, 0.062", with 162 Plated Thru-Holes. There are enough different parts to build many different types of transistor circuits.


Price:


Click here to buy from Amazon

To clarify the Smartphone camera pin



Last-modified to reveal the microphone of the camera or on a Smartphone, Smartphone pin-the user can reveal with a camera and microphone, researchers have warned. Called from pin skimmer Cambridge University team found that identifies the code you typed in as many soft keypad you can use the program. Via software, camera watches your face, and then typing and listening to click through a microphone.

Test of the Google nexus S and Galaxy S3 on a Smartphone. "We have malicious and demonstrated you can normally used for meetings and face recognition camera' says report author Professor Ross Anderson and Laurent Simon. According to the survey, is used to detect touch events on the input PIN user Mike is. Click on 'listen' can actually be it mobile phone users virtual numbers by pressing.


Camera after the user is doing this, and ', depending on the position of the numbers correlate to users tap ', calculates the orientation of the phone. "We pull lightly on your phone look or appear to move by entering your face ', said Professor Ross Anderson security engineering at Cambridge University.


It worked, just how much our surprise he told the BBC. When trying to work out the 4-digit Pin, hours after 5 attempts successful programs 50% or more. After the trial was 10 of the 8-digit PIN and success rate 60%. For many smartphone users to lock my phone pin increasingly used to access other types of applications on a Smartphone, such as banking. It says report author when entering PIN someone still doubts that resources must be accessible by phone is a sensitive.

Randomize the key.

"For example, may need to the user when the call comes in to; While unlocking his cell phone ring tones to hear otherwise he may assume the caller hung up." One proposal uses long number PIN will be identified to prevent, warn researchers this memorability and ease of use affected. "" Suggested randomized keypad numbers, researcher's believe this crock phone easier to use ".


Get rid of the password in fingerprint and face recognition, offers as a more drastic solution. "Note that if you develop payment applications that exists these risks you' warns Professor Anderson.


View the original article here

Solderable PC BreadBoard, matches 400 tie-point breadboards with Power Rails



The SB400 Solderable PC BreadBoard enables you to transfer your circuit and wires from a plug-in breadboard without recutting wires or changing your layout. The SB400 has the same pattern and spacing as a standard 400 connection point solderless plug-in breadboard. It has a standard 5-hole strip for each IC pin, just like solderless breadboards plus power rails. However, it has the advantage that soldered joints provide a more reliable long-term connection than solderless contacts. The SB400 has four power rails like solderless breadboards, plus two bonus rails for power or signals. There are bonus two-hole pads along the centerline allowing DIL (dual in-line) headers to be used.

Price: $4.99


Click here to buy from Amazon

Science Fiction Prototyping - Designing the Future with Science Fiction



Science fiction is the playground of the imagination. If you are interested in science or fascinated with the future then science fiction is where you explore new ideas and let your dreams and nightmares duke it out on the safety of the page or screen. But what if we could use science fiction to do more than that? What if we could use science fiction based on science fact to not only imagine our future but develop new technologies and products? What if we could use stories, movies and comics as a kind of tool to explore the real world implications and uses of future technologies today?

Science Fiction Prototyping is a practical guide to using fiction as a way to imagine our future in a whole new way. Filled with history, real world examples and conversations with experts like best selling science fiction author Cory Doctorow, senior editor at Dark Horse Comics Chris Warner and Hollywood science expert Sidney Perkowitz, Science Fiction Prototyping will give you the tools you need to begin designing the future with science fiction.

The future is Brian David Johnson’s business. As a futurist at Intel Corporation, his charter is to develop an actionable vision for computing in 2021. His work is called “future casting”—using ethnographic field studies, technology research, trend data, and even science fiction to create a pragmatic vision of consumers and computing. Johnson has been pioneering development in artificial intelligence, robotics, and reinventing TV. He speaks and writes extensively about future technologies in articles and scientific papers as well as science fiction short stories and novels (Fake Plastic Love and Screen Future: The Future of Entertainment, Computing and the Devices We Love). He has directed two feature films and is an illustrator and commissioned painter.

Table of Contents: Preface / Foreword / Epilogue / Dedication / Acknowledgments / 1. The Future Is in Your Hands / 2. Religious Robots and Runaway Were-Tigers: A Brief Overview of the Science and the Fiction that Went Into Two SF Prototypes / 3. How to Build Your Own SF Prototype in Five Steps or Less / 4. I, Robot: From Asimov to Doctorow: Exploring Short Fiction as an SF Prototype and a Conversation With Cory Doctorow / 5. The Men in the Moon: Exploring Movies as an SF Prototype and a Conversation with Sidney Perkowitz / 6. Science in the Gutters: Exploring Comics as an SF Prototype and a Conversation With Chris Warner / 7. Making the Future: Now that You Have Developed Your SF Prototype, What’s Next? / 8. Einstein’s Thought Experiments and Asimov’s Second Dream / Appendix A: The SF Prototypes / Notes / Author Biography

Price: $30.00


Click here to buy from Amazon

Virgin Media cost and speed increase



Prices going up high speed services to suit some people online at a time, Virgin Media Broadband Customer Bill February from 6.7 percent rise in housing. Referred to as maintaining competitive prices, that can provide customer value. 1250? House offers speed up to 152 Mbps optical fibre and cable broadband service to begin at the same time and in the rollout. 120 Mbps, then rising, it said users are less than 4 minutes in 4 seconds and want to download high-definition (HD) movies in the music album. Referred to was working it also increase the speeds of up to 20 mbps in other broadband services.Faster to download music.

"Last time should you take this kind of rise in prices on the Chin is probably" from Dominique Baliszewski web website broadbandchoices.co.uk said. "Entry into force of rules governing a new medium-term contract price rises from the Ofcom 2014 from the provider the opportunity to cancel their contracts if early, forced to raise prices during the contract period they are financial penalty without the customer. ?


Said Virgin Media Chief Executive Tom mockridge: "more and more people to simultaneously connect the Internet more often they are powerful broadband with bandwidth need homes offers a great experience for everyone". Said Baliszewski added: "for example, 10 people were all not to experience the buffering seen HD video content separately, is '. According to the industry regulator Ofcom, United Kingdom average residential broadband speed is 14.7 Mbps. But users are connected to the fibre-based network which increased 43.6 Mbps are. 19% Indicating the numbers of the latest House covers at speeds of 30 mbps high speed service. Previously announced, BT broadband customers face and 6.5 percent rise in prices from 1/2014.


View the original article here

Understanding Additive Manufacturing - Rapid Prototyping, Rapid Tooling, Rapid Manufacturing



Additive Manufacturing (AM) is the worldwide used term for layer oriented or generative manufacturing which originally was introduced at the end of the 1980s as Rapid Prototyping. Within the last 20 years it has developed dramatically. Today it is not just a valuable tool for making models and prototypes, but a manufacturing method for final parts as well as for mold inserts. It spreads throughout all disciplines and branches of industry, from art to medicine and from car manufacturing to aerospace engineering. AM is about to revolutionize the manufacturing technology in general.

Price: $79.95


Click here to buy from Amazon

Vodafone 'harsh' business interests



Last-modified  said trading in Europe said Vodafone has found trading tough conditions in Europe, but it remained improved Vodafone £ 1.5 BN ($ 2 bn ) half-year pre-tax profit expected to report "at a tough moment". He said Chief Executive Vittorio Colao is he had seen in 'during a period of strong macro economic regulation and competitive pressure. But will he return to Europe growth was encouraged by predictions. Thanks to Mr Colao market company's new smartphone was doing and said. Shifting rules that support integration and industrial investment said it wanted to be.

Mr Colao was helping focuses focus on cost efficiency, but said the challenge was a mature market. The figure in 2012, £ 3-394967296 and a half minutes, pre-tax profit from the large decline marks the. Richard Hunter, Hargreaves Lansdown Securities Co. head said Vodafone Europe's difficulties primarily decrease in profit. Performance of Vodafone in India, there was, as well as mobile phone industry competitive concerns about the regulations 'famous' some 'issue under the hood ", said. But he added: "it despite bright prospects on the horizon."

TalkTalk cheers investors

Fellow United Kingdom electrical telecommunications company TalkTalk September end instead for 6 months £ 9 m pre-tax loss came clear, Vodafone results at the same time. In the same period of the last year £ 46 m compared with the profit drop. Fueled by loss despite swinging TalkTalk shares rose more than 10 percent on its higher expected earnings growth. All year from said that it would be at least 3%, up 2 percent.

Read more [an error occurred while processing this directive] main story TalkTalk offers broadband, fixed-line and mobile telephone communications television service, is told primarily made a pre-tax loss in the television service, reflecting investment during the period. And signed at the end of September until the end of next year nearly put the track 100? viewers in three months its television service 167,000 new customers the company said. Happy the progress made in the first half we we, Dido Harding, TalkTalk Chief Executive said.Project spring

On the other hand, Vodafone is world's second largest mobile phone operator £ is a plan to improve the network in March 70?2016. Moved the following business sold to Verizon Communications, United States $ 130 bn in September Vodafone contract. Mark one of the biggest ever in the history of contract companies, and accounted for 45% of U.S. arms Vodafone business. Allow Vodafone to provide high speed broad band customers, increase investment as part of its growth plan, accelerate project of the spring 4 G network deployment and laying fiber optic cable.


View the original article here

Sunkee Transparent Solderless Breadboard



This is the Solderless Breadboard with Op Amp ICs Design Kit #1. It consists of a 830-point Solderless Breadboard with Single & Dual & Quad Op Amps,. There are also NPN & PNPTransistors, Zener & Signal & Power Diodes, Resistors, Ceramic & Aluminum & Tantalum Capacitors, Crystals, a Clock Oscillator, 5 different color LEDs, bi-color LEDs, 7 Inductors, different Potentiometers, and Electronic Hardware. The Electronic Hardware includes a Speaker, an Electret Microphone, a Battery Clip, several Switches, Headers, and more. This is an excellent collection of parts to use in your Electrical Engineering Hobby kits.

Price:


Click here to buy from Amazon

Build-your-own toy robots unveiled



The modular robots need no wires and can be controlled remotely by smartphone or tablet. A US company has unveiled build-your-own toy robots that can drive, wiggle and react to the world around them. The modular system, called Moss, uses magnetic balls as joints and hinges, has no external wires, and works without the user having to write any computer code.

By attaching a Bluetooth module, players can control the robots remotely using a smartphone or tablet. The system has been developed by Modular Robotics in Boulder, Colorado. The company launched the toys on crowdfunding website Kickstarter. But chief executive and design director Eric Schweikardt told the BBC: "We're already making Moss so we don't need the Kickstarter funding. But in 2013, it seems like the place where people look for cool new tech products." The final version of the robot kits would "begin shipping in January or February", he said. "We're at the very beginning of an exciting time for consumer robotics."

The blocks can be put together in many different ways to create unique robots. Hod Lipson, professor of engineering at Cornell University, New York State, said: "Modular robotics have been around for decades, and we've always believed they could be cheap, robust and versatile. In practice, they've proved to be expensive and fragile. "Modular Robotics is one of the first companies putting in the effort to mass-produce these things."

He believes such toys could help make robotics accessible to young children and interest them in engineering from a young age. Although he used to teach Mr Schweikardt, Prof Lipson stressed that he had no financial interest in the company. In October, scientists at the Massachusetts Institute of Technology showed off cube-shaped robots that can flip, jump and assemble themselves into different shapes. The small robots, known as M-Blocks, have no external parts but can move using an internal flywheel mechanism and stick together using magnets.


View the original article here

Slice of Pi Prototyping Board for Raspberry Pi



Convienient small break out board for the Raspberry PI. XBee style connector for XRF / XBee / RN-XV / XBT / RF-BEE etc. Has the SPI and I2C pins on one standard 8 way header and the Raspberry PI's 8 general purpose I/O pins on another for easy access. Comes as a kit of parts that needs to be soldered. Construction is very easy and suitable for children with basic soldering skills.

Price: $34.71


Click here to buy from Amazon

New invisibility cloak type design




Despite the hype about Harry Potter style cloak best current design can hide only at specific wavelengths of light and microwaves. Other in frequency, make things more visible invisibility cloak in fact no less, was discovered physicist of the United States. Their solutions wrote in the new films, electronic systems, physical review letters.

Continue reading the main story angle if you object to all transparent, and wide bandwidth on this is a good solution ' End quote Andrea Alu Texas University ' our active cloak design completely new concept and the [current cloak ' aimed at hitting the limit indicates it is indeed, "and Professor from the University of Texas at Austin Andrea Alu. "If you create the object at an angle of all transparent, wide bandwidth on this is a good solution. ' We are looking to achieve this technology at the moment, but we still early stage 'Passive vs. Active

Invisibility Cloak popular image of different types wearing Harry Potter magic robe is not far-fetched. First working model - hide the small copper cylinder by microwave ovens around the bend - and was first shown in 2006. But the more radiation than when the ball on the right side distracting actually be covered by naked.


Metamaterial - structure was built with thin shell of artificial composite materials allow the property does not exist in the natural world. Application possibility of cloaking material, military, microscopy and biological sensing energy production equipment. The trouble with the current design works only with their limited bandwidth. You can also this "perfect" 3D mantle demonstration last year only hide the object from the microwave oven.


Make the cloak acts better explicit hidden objects - beacon as the other frequencies as a Professor, Alu - and his team is now shown in the new study of the physical review X. They plasmonic cloak, mantle mantle and cloak of transformation optics-'passive' do not require electricity of mantle-of saw three popular types.

Continue reading the main story  optical camouflage technology: retro reflective materials ( to confirm the projector screen use type ); of cloak standing the wearer projected projection source Mirage effect change background image nobody hides: background of light bouncing off them, through carbon nanotubes to create a very high current local temperature the waterlogged, and hidden object behindAdaptive thermal cloaking: camera temperature records, These are displayed in the car is moving from the camerasCalcite Crystal Prism quickly, heat-sensitive change temperature very hexagonal pixel camouflage sheets: calcite Crystal sends two optical light in different directions. You can Prism-shaped crystals of specific geometry to oversee polarized around small objects by sticking together, hidden-waves of the nude was trying when tested over the entire range of the electromagnetic spectrum than the cloaking 3 types of themAll scattered effectively.


Necessary to suppress scattering in the range of one interested and pay a price in the range of the other Professor, Alu told BBC News. "For example, might make the cloak objects invisible to red light. Actually seeing bright blue when illuminated by white light (including all the colors), so I would stand out more. " Signed an 'impossible' complete invisibility cloak you can research the current passive and design. To add materials around the object to cloak it available problem and this problem is still adding the electromagnetic response in waves in the inevitable fact, explained Professor Alu.


Instead, he said more promising avenue is "active" cloaking tech-design power-dependent object 'disappear'. Active cloak Cape thinner, passive-aggressive than less-noticeable to can. ALU team is current has proposed new design surface using the amplifier to coat. Detection by frequency range "less broad" ultra thin cloak object to hide any available passive cloaking technology than they wrote.

Nothing is perfect

He said details of the new design was in one is Duke University Professor David Smith one team created in 2006, the first Cape had seen yet. ' It's interesting implementation is probably limited to bits as presented for specific kinds of objects ' told BBC news he was. "Active materials are also limited. Would be interesting to it whether or not experimental realization that you can see. "


Professor Smith has pointed out may be sufficient for even a partial invisibility cloak build useful device complete in real-world applications. For example, radio frequency cloak can improve wireless communications-by helping them reduces the interference from the bypass obstacles or near the antenna.


"Meaning 'invisible' most people object to make it visible transmittance wavelength to make the. Is a small, small sliver of the whole visible spectrum electromagnetic spectrum, "he told BBC News. "Even so, this finding is necessarily preclude cloak in Harry Potter it's cloaking other eliminating narrow-band applications. Provides an overview of how to Professor Chris Phillips three things to hide.



View the original article here

Prototype Prototyping Shield ProtoShield for Bread board



Prototype Prototyping Shield ProtoShield for Arduino Duemilanove with Mini Bread Board With Arduino Duemilanove used to build the circuit prototypes can directly solder components on the board, the circuit can also be connected through mini bread plate above. Sided adhesive connection between the bread board and the board, bread board and the circuit board is sold separate. ProtoShield prototype expansion board with two LEDs and two buttons circuit, can be used directly, pin and power have been elicited, very suitable and Arduino with the build circuit prototype

Price:


Click here to buy from Amazon

Where is the next generation of coders?



GMT by Jane wake-field technology reporters A robot can turn their heads 360 degrees, was last updated in management by the Tablet has been developed. Pogrammers these days was 1980s supermodel is to demand is. Municipal Hospital from the Bank on their team wishes everyone specialized. However, because as well as the many jobs rely on computing and coding skills conversely less people to fill them. To stop the crisis of coding needs to be done to persuade dark room, pizza, more youngsters to code than the unsociable hours or something.


Robot friend


Vikas gupta said Google is consumer payments from head answer is start them early. See 2-year-old daughter, anything for the kids wanted. I question can start what age child coding concepts to grasp, "he told BBC. Young children 5 according to MIT learning Mr. gupta, came across a study done via specific interactions, understand the coding concepts.

You can encourage young kids to Bo and Jana code?

"It was eye-opening in my eyes. No products exist due to its age. So can have embarked under the 10-year-old child to design something fun to learn programming, "he said. He also came up with Bo and Jana without realising it, to teach children about programming aimed at two robots. Jana small robots, and making noises, and the can be programmed to perform actions. Bo's robots can be programmed to move around and interact with each other. They can be can be programmed very often hide and seek and Mr. Gupta said.


First child just a variety of games, coding almost recognizes, start by playing with robots. Of moving them to hang your own code to create your Visual programs, such as scratching that has. Robots are controlled wirelessly via both Tablet and Smartphone-the app for iOS devices available only. Crowdfunded project, and hit the target in the $ 250,000 within three days. Plan is start robot sales in the summer of next year. Mr. Gupta also enters the robot school for enthusiastic, committed to the development of a curriculum for those resources.

Technology education

As part of his research, Mr. gupta, was shocked at the State of education in the United States. "Computer science education got worse last 20 years not the better," he said. It seems to bear this 2010 report from the computer science teachers Association. It's more than two-thirds of the States of the United States found little or no computer science standards at the secondary school level. Or computer literacy, computer science ' deep and widespread confusion ' about also what technology education should consist. Reports that the United States "to to prepare students with the skills necessary for basic computer science knowledge had fallen behind a disastrous and future success" and concluded.

1 Day from coding  before their children go to school are accustomed to using technology. It can draw some valuable lessons from Estonia. Only East European country may be small-its population is just 130?-punch undoubtedly it is birthplace of Skype with enviable electronic government program, including several big-name tech companies in its weight on it will be technology.

President - who own a's bit of coding his hand his own University-informed and provide funding for the education goes to see wanted about him, very clear. He was Education Minister Jaak ?????, once a physicist, wants to drag the education system in the age of the computer has a backup. "It's 19 century the rising challenges of the 21 century education how to time the ' tells the BBC he has. As part of the his as soon as possible in the classroom of children 7-year-old coding introduces.


"Children are very talented already do complex things tablets and smart phones on. If you are using then should not when starting school there is no gap. He added that "bringing home children need places such as schools, old style, but to build on the potential. Current initiatives have been tested in next 5 years Mr. ????? expect rollout to all elementary schools. Do not stop coding for 7 years and Estonia's radical education plan.

Quadratic equation math lesson is need an overhaul?

Group 2 March announced the partnership with Oxford-based computerbasedmaths.org to ????_??? how mathematics fundamental to purpose is taught in schools. You need to use mathematics to solve problems that really interest them, and to teach our children when British engineer Conrad, Wolfram group established, get the computer in the complex calculations, there is little point in more creative.


Believe is a basic calculation tables and other learning requires time, beginning, middle school kids get complex calculations of his emphasis is most likely unnecessary and non-students to enable. "It's not dumbing it, is that it becomes difficult. Also it geared towards problem you might want to fix more fun than "he told the BBC.


Quadratic pose lesson, instead of focusing on real-world class computer-based mathematical problem-solving, so questions like "normally I do? "," And beautiful shape "or" I do need a laptop warranty? ?


Estonia will test the system at 30 secondary schools.


"Use math to solve problems as the ideas Toolbox," said Mr ?????. He is also considering ideas to bring their devices to school children. ' May need to prepare many pills and other stuff are not for, "he said.

New language

ICT curriculum in England and Wales is about is replaced with believe Education Minister Michael Gove, ripping one interest from both young people and prepares a world dominated the computer worked better than them. Less emphasis to development than spreadsheets and arguably return to good old-fashioned coding. Wolfram for his part should go more for Gove's plans, and also we can start the rip current math curriculum. "It agenda back to the awesome coding have you think that is attached to the elementary school math coding ' and said he. These changes overnight-, actually he was to reflect the computer age estimates that curriculum change in bed will be 25 years but he finally, hope it will be confident using coding languages, can create a student believes that.


View the original article here

Designing, Prototyping, Playtesting Games



As experienced teachers of novice game designers, the authors have discovered patterns in the way that students grasp game design - the mistakes they make as well as the methods to help them to create better games.

Each exercise requires no background in programming or artwork, releasing beginning designers from the intricacies of electronic game production and allowing them to learn what works and what doesn't work in a game system. Additionally, these exercises teach important skills in system design: the processes of prototyping, playtesting, and redesigning.

Price: $46.95


Click here to buy from Amazon

Prototype Development




Designing and prototyping have revolutionized the manufacturing processes in all industries nearly. There is not a single industry or process that is untouched by the technology of designing and prototyping.

Designing: Designing is the process by which you will design a product in advance before actual production. Designing will help you to innovate, change, modify and invent. Designing involves the process of idea generation, conceptualizing and actual design development.

Prototyping: Prototyping is a process in which a working model or prototype is developed for the purpose of testing the various design aspects like features, ideas, viability, functionality, output and performance. The prototyping will help in getting a quick user feedback. Prototyping is considered to be an essential element of the process of system designing.

Designing and prototyping go hand in hand, as both are complementary. In prototyping, new prototypes are developed on the basis of the performance of earlier designs. The deficiencies or problems in the previous designs can be detected and corrected. The prototype is redesigned after refinement and successfully meets the designing goals like functionality, manufacturability, performance and robustness. After this, the product can be readily produced.

Benefits of Designing and Prototyping: The scope of designing and prototyping is unlimited. Both have applications in all types of industries like CAD, CAM, automotive industry, workshops, fashion designing and innovative products and so on. With designing, you are able to create digital data in the form of 3D images and this digital data can be transformed into actual physical object by way of prototyping. You can visualize about how the final product will look. You can translate your inventions and innovative ideas in real terms with the help of designing and prototyping.

You may be toying with many innovative product ideas in your mind and you wish to convert them into realities. You can successfully develop your new invention from an idea to actual manufactured product with designing and prototyping. You can test your product by testing its commercial viability. You can have an open communication with the user regarding the expectations of the product and its performance. This will give you a fair idea regarding the designing and prototyping.

Appropriate Designing and Prototyping: If you want your invention or innovative product to be successful, then it needs to have a good design and there have to more additives than a plain good idea. The design should be such that it reduces the manufacturing costs. The design must have excellent functionality and it should be attractive as well along with the benefit of maximized durability. The designing and prototyping should work together to maximize the chances of success.

The best approach for an appropriate designing and prototyping plan, would be to design and create an eye-catching and working prototype along with good packaging. Necessary legal protection should be obtained. Engineering drawings should be produced and pricing data for manufacturing process should be generated. All the production facilities of the factory should be lined up. Take feedback from the end users and buyers and you will get an idea of the demand for your product. This appropriate designing and prototyping plan, is sure to spell success for you.




Go to Prototype Zone to get your free ebook on Prototyping at Prototyping [http://www.prototypezone.com/]. Prototype Zone also has http://www.prototypezone.com/




Maker Beam 100 mm beam, black anodised



MakerBeam 100mm beams for Maker projects and professional prototyping. Contents: 16 aluminum black anodized beams measuring 10x10x100mm width, height, and length (0.394x0.394x3.937"). Application: scientific, electronics, laboratories, home technical projects, displays/exhibits, robotics, etc. MakerBeam.eu is a versatile and lightweight structural system (T-slot) with components that give endless building possibilities in desktop size. There are no fixed positions for mounting giving you the freedom to build your own design easily. All MakerBeam elements can be combined and reused (no welding required) enabling shorter design and assembly times and allowing assembly from your desk or dinner table.

Price:


Click here to buy from Amazon

Rapid Prototyping Disadvantages




Rapid prototyping is a process wherein a working model or prototype is developed for the purpose of testing the various product features like design, ideas, features, functionality, performance and output. This process of development of working model is quite quick. The user can give an early feedback regarding the prototype. Rapid prototyping is, generally, a significant and essential part of the system designing process and it is believed to decrease the project cost and risk.

The prototype that is developed by the process of rapid prototyping is based on the performance of earlier designs. Hence, it is possible to correct the defects or problems in the design by taking corrective measures. The product can be produced if the prototype meets the requirements of all designing objectives after sufficient refinement. There are many advantages of rapid prototyping.

Rapid Prototyping -Advantages in brief: Rapid prototyping has manifold advantages. It can provide with concept proof that would be required for attracting funds. The prototype gives the user a fair idea about the final look of the product. Rapid prototyping can enhance the early visibility. It is easier to find the design flaws in the early developmental stages. Active participation among the users and producer is encouraged by rapid prototyping. As the development costs are reduced, rapid prototyping proves to be cost effective. The user can get a higher output.

The deficiencies in the earlier prototypes can be detected and rectified in time. The speed of system development is increased. It is possible to get immediate feedback from the user. There is better communication between the user and designer as the requirement sand expectations are expressed in the beginning itself. High quality product is easily delivered by way of rapid prototyping. Rapid prototyping enables development time and costs. There are many innovative ways in which rapid prototyping can be used.

Despite all these benefits, there are many people who believe that there are many disadvantages of rapid prototyping.

Disadvantages of Rapid Prototyping: Some people are of the opinion that rapid prototyping is not effective because, in actual, it fails in replication of the real product or system. It could so happen that some important developmental steps could be omitted to get a quick and cheap working model. This can be one of the greatest disadvantages of rapid prototyping. Another disadvantage of rapid prototyping is one in which many problems are overlooked resulting in endless rectifications and revisions. One more disadvantage of rapid prototyping is that it may not be suitable for large sized applications.

The user may have very high expectations about the prototype's performance and the designer is unable to deliver these. The system could be left unfinished due to various reasons or the system may be implemented before it is completely ready. The producer may produce an inadequate system that is unable to meet the overall demands of the organization. Too much involvement of the user might hamper the optimization of the program. The producer may be too attached to the program of rapid prototyping, thus it may lead to legal involvement.

The cost reduction benefit of rapid prototyping also seems to be debatable, as sufficient details regarding the calculation basis and assumptions are not substantial.




Go to Prototype Zone to get your free ebook on Prototyping at Prototyping [http://www.prototypezone.com/]. Prototype Zone also has Rapid Prototyping Forum, Prototype Manufacturing Blog and other information on Prototype Information and daily news. You can Find Prototype Zone at [http://www.prototypezone.com/]




Manufacturing Techniques for Product Design



There are many ways in which a product can be manufactured but most designers know only a handful of techniques. Informative and incredibly easy to use, this bestselling book discusses more than a hundred production methods in detail. Making It appeals not only to product designers but also to interior, furniture, and graphic designers who need access to a range of production methods, as well as to all students of design. This expanded edition includes nine new processes and an all-new section of over 40 finishing techniques.

Price: $35.00


Click here to buy from Amazon

Prototype Machining History




Rapid prototyping is a revolutionary and powerful technology with wide range of applications. The process of prototyping involves quick building up of a prototype or working model for the purpose of testing the various design features, ideas, concepts, functionality, output and performance. The user is able to give immediate feedback regarding the prototype and its performance. Rapid prototyping is essential part of the process of system designing and it is believed to be quite beneficial as far as reduction of project cost and risk are concerned.

Rapid prototyping is known by many terms as per the technologies involved, like SFF or solid freeform fabrication, FF or freeform fabrication, digital fabrication, AFF or automated freeform fabrication, 3D printing, solid imaging, layer-based manufacturing, laser prototyping and additive manufacturing.

History of Rapid Prototyping:

Sixties: The first rapid prototyping techniques became accessible in the later eighties and they were used for production of prototype and model parts. The history of rapid prototyping can be traced to the late sixties, when an engineering professor, Herbert Voelcker, questioned himself about the possibilities of doing interesting things with the computer controlled and automatic machine tools. These machine tools had just started to appear on the factory floors then. Voelcker was trying to find a way in which the automated machine tools could be programmed by using the output of a design program of a computer.

Seventies: Voelcker developed the basic tools of mathematics that clearly describe the three dimensional aspects and resulted in the earliest theories of algorithmic and mathematical theories for solid modeling. These theories form the basis of modern computer programs that are used for designing almost all things mechanical, ranging from the smallest toy car to the tallest skyscraper. Volecker's theories changed the designing methods in the seventies, but, the old methods for designing were still very much in use. The old method involved either a machinist or machine tool controlled by a computer. The metal hunk was cut away and the needed part remained as per requirements.

Eighties: However, in 1987, Carl Deckard, a researcher form the University of Texas, came up with a good revolutionary idea. He pioneered the layer based manufacturing, wherein he thought of building up the model layer by layer. He printed 3D models by utilizing laser light for fusing metal powder in solid prototypes, single layer at a time. Deckard developed this idea into a technique called "Selective Laser Sintering". The results of this technique were extremely promising. The history of rapid prototyping is quite new and recent. However, as this technique of rapid prototyping has such wide ranging scope and applications with amazing results, it has grown by leaps and bounds.

Voelcker's and Deckard's stunning findings, innovations and researches have given extreme impetus to this significant new industry known as rapid prototyping or free form fabrication. It has revolutionized the designing and manufacturing processes.

Though, there are many references of people pioneering the rapid prototyping technology, the industry gives recognition to Charles Hull for the patent of Apparatus for Production of 3D Objects by Stereolithography. Charles Hull is recognized by the industry as the father of rapid prototyping.

Present-day Rapid Prototyping: Today, the computer engineer has to simply sketch the ideas on the computer screen with the help of a design program that is computer aided. Computer aided designing allows to make modification as required and you can create a physical prototype that is a precise and proper 3D object.




Go to Prototype Zone to get your free ebook on Prototyping at Prototyping [http://www.prototypezone.com/]. Prototype Zone also has Rapid Prototyping Forum, Prototype Manufacturing Blog and other information on Prototype Information and daily news. You can Find Prototype Zone at [http://www.prototypezone.com/]




Prototyping: A Practitioner's Guide



Prototyping is a great way to communicate the intent of a design both clearly and effectively. Prototypes help you to flesh out design ideas, test assumptions, and gather real-time feedback from users. With this book, Todd Zaki Warfel shows how prototypes are more than just a design tool by demonstrating how they can help you market a product, gain internal buy-in, and test feasibility with your development team.

Price: $39.00


Click here to buy from Amazon

Rapid Prototyping Benefits




Rapid prototyping is a process of software development wherein physical objects are automatically constructed by means of SFF or solid freeform fabrication. In the process of rapid prototyping, a prototype or working model can be constructed quickly, and tested for its functionality, performance and output. The new features or ideas can be illustrated well in the prototype and early user feedback can be gathered with regards to the product. There are numerous advantages of rapid prototyping.

Benefits of Rapid Prototyping: Significant advantages of rapid prototyping include reduction of project cost and risk. Generally, one or more prototypes are developed in the process of software development in a series of incremental and iterative steps. Every prototype that is manufactured is based on the previous designs' performance and it is a corrective process through which the past design defects or problems are corrected. The product is readied for production when the prototype is refined as per requirements and meets all the design goals like manufacturability, robustness and functionality.

Another great advantage of rapid prototyping is that it finds use and application in almost all the industries. The other advantages of rapid prototyping include the following.

Visualization capabilities are enhanced in the early designing phase with use of rapid prototyping. The user gets a fair idea of how the final product will look by observing the working model in early design stage.

The design flaws can be detected before manufacture process is initiated.

Rapid prototyping enables producer and users to participate actively. Active participation between the users and producer is encouraged.

The user is able to get a higher output.

The development costs are reduced considerably, hence rapid prototyping proves to be quite cost effective.

Rapid prototyping increases the speed of system development.

With rapid prototyping, it is possible to detect deficiencies in the earlier prototype, coding activities and requirement analysis.

Rapid prototyping assists in refining the potential risks that are involved in the delivery

The different aspects of the prototype can be tried and tested and immediate feedback is possible form user.

Better communication is enabled between the users and designer as there is clear expression of requirements and expectations in the start itself.

Rapid prototyping enables easy delivery of high quality product.

Cost and Time Savings: Savings of development time and process costs are some of the greatest advantages of rapid prototyping. Time can be saved by reducing the amount of time required to produce the prototype parts and tooling. Production costs are lowered as the mistakes regarding tooling are identified in the early stages and hence, the modification costs can be cut down in the actual production.

Advantage of Innovation: Rapid prototyping can be used in many innovative ways. There are many firms that use rapid prototyping innovatively, hence, offering additional benefits. The advantages of rapid prototyping in innovative applications are advancement of new testing procedures and analysis, production tooling manufacture, improved communications across production departments and support of customized manufacturing. The new technologies can be used in a cost effective and successful manner with innovative applications of rapid prototyping.




Go to Prototype Zone to get your free ebook on Prototyping at Prototyping [http://www.prototypezone.com/]. Prototype Zone also has Rapid Prototyping Forum, Prototype Manufacturing Blog and other information on Prototype Information and daily news. You can Find Prototype Zone at [http://www.prototypezone.com/]




Prototyping PCB Universal Board



Prototype Prototyping Shield ProtoShield for Arduino Duemilanove with Mini Bread Board With Arduino Duemilanove used to build the circuit prototypes can directly solder components on the board, the circuit can also be connected through mini bread plate above. Sided adhesive connection between the bread board and the board, bread board and the circuit board is sold separate. ProtoShield prototype expansion board with two LEDs and two buttons circuit, can be used directly, pin and power have been elicited, very suitable and Arduino with the build circuit prototype

Price:


Click here to buy from Amazon

Prototype an Idea Or Invention



Each idea is different and the best approach to prototyping depends on the specifics of the idea. However there are some basic principles that can help. The first question to ask is: "What is the prototype for?"


Presentation to interested parties


When presenting your idea to an investor or company representative it might not actually be necessary to have a prototype. It is often possible to convey the idea or invention to an interested party using a graphic presentation. The idea should be designed, ideally using computer aided design, and then images of the product laid out on presentation boards. It is probably best to get a professional product designer to complete the design work and show how the product looks and what it does. Try to find a design company that specialises in product design for inventors. One UK based company is Innovate Design.


If funds are tight it is better to spend the money on a professional presentation rather than a prototype. The presentation will be more cost effective than the prototype and will be quicker to produce. The work done during the design stage can help reduce the cost of the prototyping stage if it becomes necessary at a later date.


When a prototype is necessary


Concept prototypes are sometimes necessary to either prove that an idea works or instantly convey an idea that is hard to describe on paper. If people need to interact with the idea to be persuaded of its benefits then a prototype can make all the difference.


Often people are more prepared to back an idea if they can see that a lot of the development work has already been done and a prototype demonstrates this. An inventor could typically expect to charge more for an idea if it has been prototyped so it is worth considering if the funds are available.


How much will a prototype cost?


Prototypes costs vary hugely depending on the size and complexity of the idea. Typically for a small handheld product with a unique shape it could be in the region of two to three thousand pounds.


Why are prototypes so expensive?


Often the idea has to be designed first to establish the layout of internal components and the shape of the casing among other considerations. Then a virtual model has to be built using computer aided design and then finally a prototype can be built using rapid prototyping. All of this takes time and therefore it is expensive.


What is rapid prototyping?


Rapid prototyping is a technology that takes a 3D computer model and builds a 3D plastic part. There are three basic techniques for rapid prototyping: Stereolithography, Selective Laser Sintering and Fusion Deposition Modelling. For all these processes the model needs to be professionally designed using computer aided design.


Are there cheaper ways of building a prototype?


Some ideas can be prototyped simply from existing products or by using ordinary materials and these will be cheaper than prototypes that are built using rapid prototyping. Another cheaper way is to build a prototype that proves the principle of the idea without necessarily looking like the final product. This is called a 'proof of principle' prototype. Alternatively an aesthetic model could be built that shows what the product will look like but does not prove whether it will work.


What are the different types of prototype?


There are three main categories of prototype:


1. Proof of principle: A prototype that simply proves that a particularly new system or mechanism works. Often it is just part of the overall idea and it does not need to look like the final product.


2. Aesthetic model: A prototype that looks like the final product but is not fully functional.


3. Pre-production prototype: A pre-production prototype looks, feels and works like the final product. This type of prototype can be produced to mimic how it would actually be manufactured to check that everything will fit together correctly.


How can I get a prototype built?


If you do not have the facilities or expertise to build the prototype yourself then there are companies that specialise in building prototype inventions.


Solderable Copper Pad Small Perf Board for Prototyping



These perf boards have pre drilled holes every 1/10". They are perfect for electronics projects that require a small circuit board. On one side of the board there are copper rings around each hole for soldering or temporary circuit testing.

Price:


Click here to buy from Amazon

All Your Prototype Questions



In this article I will discuss the three most popular questions I receive when it comes to a prototype. What is a prototype? Should I develop a prototype? Reasons to develop a prototype.


What is a prototype?


A prototype is an original model on which something is patterned. A prototype can range from a crude mock-up developed by the inventor to professionally designed virtual prototypes and/or fully functioning working samples.


The process of taking your idea and turning it into a tangible product is called "reducing the invention to practice" and the first step in this process is the development of a prototype. When it comes to prototype development, the inventor can utilize a professional prototype company, virtual designer, model-maker or construct it on his own. I have seen many prototypes from inventors ranging from cardboard and tape to professionally designed and constructed working samples. Keep in mind that the prototype process is evolutionary, meaning that you may start with cardboard and evolve the prototype through several iterations over time, as you refine your invention.


At one time, the USPTO required that a working prototype accompany all patent applications filed. This requirement limited the number of patent applications that were filed, particularly on inventions that did not actually work or function as intended. When the USPTO removed this requirement, the patent business exploded and we began to see countless hypothetical and theoretical inventions with issued patents on products that did not work as intended.


Should I develop a prototype?


As I discussed on the introduction page, there are two options for going to market: manufacturing on your own, or licensing for royalties. Various decisions that you make throughout the process will be driven by which option you choose in going to market, as described below.


Option 1 - Manufacturing on your own - if you are planning to manufacture your invention on your own - either domestically or by utilizing overseas manufacturers - you really don't have a choice about developing a prototype. You will have to develop a prototype of your invention to prepare for manufacturing (i.e.: you can't manufacture something unless you know how it works).


As for manufacturing, if you utilize a US manufacturer it will likely be an easier process of setting up the manufacturing but it may be more expensive for setup, molds, and unit costs, yet, going overseas also has its tradeoffs. With technology, the Internet, and the boom in overseas manufacturing in the last 5-10 years, it has become much easier to connect with manufacturers in China, Taiwan, and other countries; however, many inventors do not understand that typically, you need to provide them with an exact working sample or prototype that you would like produced. Chinese and Taiwanese manufacturers are great at copying a finalized prototype that you provide for mass production but, don't expect them to be as good at figuring out how your invention works and developing working prototypes. More than likely, you will need to do this in the US and then supply the prototype to your overseas manufacturer. Also, you should consider the language barrier of working with manufacturers overseas. We have been working with the same Taiwanese manufacturer for over eight years and I still have a hard time understanding and communicating with him.


Option 2 - Licensing for royalties - if you are planning on licensing your invention for royalties, it will still be helpful to develop some form of prototype; however, it is not always necessary to develop a fully functioning working sample, which can be very expensive. Depending on the particular invention, a "Virtual Prototype" may be a more cost effective solution. A Virtual Prototype is a computer-generated, animated model, which can be rotated on-screen and will enable you to showcase your invention to prospective companies.


Oftentimes, this is all you need to attract interest in and to possibly license your invention; although, it is still possible that a company may ask to see a tangible prototype after a virtual prototype first raises their interest in your invention. In this instance, you could request that the company evaluate without the prototype or you could consider alternatives such as building a mock-up of your own. For example, in the case of a particular inventor of ours, we generated interest from a company based on a very professional virtual prototype, which peaked their interest initiating product conversations. Later in the process, the company asked if the inventor had a tangible prototype, which she did not.


We suggested to the inventor that she construct a simple mock-up of the product using cardboard or foam board. The inventor spent less than $10 on supplies and a few hours to construct a very nice model out of foam board and the company was more than satisfied. The virtual prototype "sold" them on the concept and the tangible model gave them a better feel for the actual product dimensions and function while the inventor did not have to spend thousands of dollars developing a working prototype.


Reasons to develop a prototype


1. Without a virtual or tangible prototype, it will be more difficult for a buyer to understand your invention. As discussed, the chance of success increases as you move your invention through the development process. A prototype brings your idea to life for the person evaluating your invention, which increases the chances of ultimately taking your invention to market.


2. A developed prototype helps to work out the details of the invention. Identifying design flaws and weaknesses is much easier when you can actually test the invention. Engineering drawings and artwork alone cannot "prove" the concept in the same manner that a prototype can - prototypes help to ensure that the invention will work the way you intended.


3. Having a virtual or physical prototype helps to identify key details that should be included in the provisional and/or non-provisional patent(s). Filing a patent first before developing a prototype could lead to key details being excluded from the patent application - details that are learned only through prototype development. For this reason, I recommend that if you plan to develop a prototype, you do it first, before you file a patent.


4. Patent drawings will be much easier to complete if a model is available from which to work.


5. Developing a working prototype can also help to determine the best manufacturing materials and processes. Your original invention may be altered based on the prototype.


Virtuabotix Fully assembled Arduino Compatible Prototyping Shield



Remember that last project you did? You know the one were talking about, this time forget the mess of wires and save yourself a boat load of time and hassle. The breadboard and Protoshield can be used together or separate, and make switching from project to project a snap. No serious geek should be found with one.

Price: $19.95


Click here to buy from Amazon

Developing a Successful Prototype of Your Idea



Prototyping is one the most important stages of the design process. A prototype allows many different aspects of the product to be tested, including its general aesthetic and shape, dimensions, mechanics, electronics and materials. Every unique product will require a very different approach to prototyping because both the type of prototype required and the timescale and cost involved will vary with the complexity, size, functionality and type of product.


Approaching potential buyers with a 3D computer generated model and renderings enables them to visualise the final product, gain an idea of how it would work and potentially express an initial interest. However, the best way to establish firm commercial interest from buyers is to place a prototype in front of them that gives an accurate reflection of the finished design.This is becauseprototypes allow potential clients and buyers to get hands on with the product and explore how it will work.


Types of Prototype : 


There are several types of prototypes, all of which have different functions.


A visual prototype gives an idea of the general shape and form the final product will take, but it is not necessarily made in the same material as the final product. Visual prototypes can be made using rapid prototyping, a process which creates 3D models of the product directly from CAD data. It is, as the name suggests, a quick process and is ideal for simple plastic products.


For slightly more complex products a proof of concept prototype is usually needed. This will validate the functionality of the product and test any mechanisms. Proof of concept prototypes generally do not look like the final product, as they may consist of a circuit board to confirm the electronics are correct, or a mechanism which needs to be tested. Proof of concept prototypes generally take longer to produce than rapid prototypes, and can be fairly complex.


Presentation prototypes aim to demonstrate both the working parts and the visual aspects of the final product, and can be taken to companies or the public to gain a further idea of interest in the product, and secure some letters of intent or preliminary orders. A presentation prototype will give a good idea of how the final product will look, feel and work, and is a great tool when pitching a product.


A pre-production prototype is the final stage of the prototyping process, and it will look and function exactly as the final mass produced product will, and will be made of the same materials, if possible.


For simple products it may be possible to create a visual or proof of concept prototype using cardboard and sticky tape or needle and thread, though when approaching professionals and companies to launch the product it is often more appropriate to commission a company to design and produce a prototype.


How are Prototypes made?


There are many processes which yield very different results, and should be chosen based on what the prototype is designed to do. For example a plastic part, such as a casing for an electrical device, could be rapid prototyped in SLS or SLA materials, whereas a vacuum casting process may be used for a rubber product, to allow the prototype to closely mimic the material properties of the final design. A professional design engineer can help guide you as to the best processes and materials for your prototype.


The Right Professional Help


When choosing a company to prototype your idea it is important to consider more than one option, approaching three companies and getting quotes from each will aid the decision, though it should be noted that the cheapest option is not necessarily the best one, because price is not the only factor to be considered. Ideas are precious things, and they should not be passed on lightly.


You should ensure that the chosen company will add value to your product during the prototyping process. For example, you really need a company whose team includes product designers who can think of further features, style the product superbly and refine the usability. You also need to ensure the company will develop your concept in a way that is possible to manufacture, not just something that looks good. For this reason you should choose a company which is actively involved in the manufacturing process.


The level of service is very important and reviews from previous clients should be requested. A meeting face to face will help ensure the company have a good understanding of the product idea and that you are likely to get on well with them. The path from idea to final product is a long one, and so it is important that you and your design engineer get along and understand one another.


How much do Prototypes Cost?


Costs and timescales are completely dependent on the product. Rapid prototyping a small, single part plastic product could cost between £300 and £1200, and take 2-3 weeks to produce. A simple electronic device may cost in the region of £2000 to £4000, and complex device with intricate electronic systems may cost £20000 to £30000. Complex products can take a few months to prototype, as it may be necessary to source different trusted suppliers to manufacture different components of the product.


Conclusion


Prototyping is an essential part of every design process and it should not be overlooked. A good product prototype is superior to any description or illustration, and a good design engineer will be able to inform decisions, develop ideas, add value, design for production and finally provide a presentation prototype that can be pitched to industry representative. A good prototype will speak for itself and should maximise your chances of successful negotiations.


Phil Staunton is Managing Director of D2M Innovation Ltd. D2M has a proven track record of helping entrepreneurs protect, develop and sell their ideas. Check out the D2M website for further information on creating a prototype or for a detailed description of the patent process.