SchmartBoard releases new Board for TI MSP430F5172

SchmartBoard, a company that makes prototyping electronic circuits easier, has expanded its product range with a new Development Board to support users of the Texas Instruments microcontrollers.  These boards use our "EZ" soldering technology to ensure quick, easy and perfect soldering. According to Texas Instruments online product information: (http://www.ti.com/product/msp430f5172)

"The Texas Instruments MSP430 family of ultralow-power microcontrollers consist of multiple devices with different types of peripherals targeted for different applications. Architecture, combined with five low-power modes, is optimized to achieve longer battery life in portable metering applications. The unit has a powerful 16-bit RISC processor, 16-bit registers and constant generators that contribute to maximum code efficiency. Digitally controlled oscillator (DCO) can wake up from low power mode to active mode in less than 5 µs.

MSP430F51x2 series microcontroller configurations with two 16-bit high-resolution timers, universal serial communication interface (USCI_A0 and USCI_B0), 32-bit hardware multiplier, a high performance 10-bit analog-to-digital (A/D) converters, on-chip comparator, three-channel DMA, 5-V tolerant I/Os, and up to 29 i/o pins. MSP430F51x1 series microcontroller configurations with two 16-bit high-resolution timers, universal serial communication interface (USCI_A0 and USCI_B0), 32-bit hardware multiplier on-chip comparator, three-channel DMA, 5-V tolerant I/Os, and up to 29 i/o pins.

Typical applications for these devices include analog and digital sensor systems, LED lighting, digital power supply, motor control, remote controls, thermostats, digital timer, hand-held meter, etc. "

The Board was co-designed by Texas Instruments and the University of Colorado's EE Department to address educational needs.  With students in mind, it has been aggressively priced at just $ 35.00, fully populated and ready to go.

If SchmartBoard (www.schmartboard.com)

SchmartBoard ™ is committed to helping make the development of electronic circuits, faster, simpler and cheaper than previously possible. Schmartboards patented "EZ" technology makes hand soldering of components for surface mounting quick and error-free.  Our products are used by engineers, students and hobbyists of simple to complex electronic circuit design work.

View the original article here

SchmartBoard releases a new tip for MSP430F5172 t.i.

SchmartBoard, a company that facilitates prototyping electronic circuits, has broadened its product offering with the new Council development for Texas Instruments microcontroller user support.  These boards use our "EZ" soldering technology to provide fast, easy and flawless.

The Texas Instruments MSP430 family of microcontrollers is ultra low voltage devices, showing a different set of peripherals, designed for different applications. Architecture, combined with five low-power modes are optimized to achieve the extended battery life in portable measurement applications. The device has a powerful 16-bit RISC processor, 16-bit registers and permanent generators, affecting the efficiency of the maximum code. Digitally controlled oscillator (DCO) allows you to Wake up from the low-power modes Active mode in less than 5 ?S.

MSP430F51x2 series microcontroller with two configurations were 16-bit high-resolution timers, universal serial communication interfaces (USCI_A0 and USCI_B0), 32-bit hardware multiplier, high performance 10-bit analog to digital (A/D) converter, comparator, three-on-a-chip DMA channel 5-V tolerant i/o and up to 29. MSP430F51x1 series microcontroller with two configurations were 16-bit high-resolution timers, universal serial communication interfaces (USCI_A0 and USCI_B0), 32-bit hardware multiplier, three-on-a-chip comparator, DMA channel, 5 V-tolerant i/OS and up to 29.

Typical applications for these devices include analog and digital sensor systems, led lighting, digital power, motor control, remote controls, thermostats, timers, digital, hand-held meters, etc. "

The Council was developed jointly with Texas Instruments and the University of Colorado Department of EE address educational needs.  With the students in mind he was aggressively price of only $ 35.00, fully populated and ready to go.

SchmartBoard ™ is committed to helping make electronic circuit development faster, easier, and cheaper than ever before. Patented SchmartBoard EZ "in" makes hand soldering surface mount components quickly and flawlessly.  Our products are used by engineers, students and lovers of simple to complex electronic circuits design work.

View the original article here